Epoxy Garage Floor Cost in North Texas (2026 Guide)
What an epoxy garage floor costs in North Texas, from a $150 kit to a full flake-and-polyaspartic system installed by a local crew.
Pricing a garage floor gets confusing fast. One website says $2 a square foot. A national installer quotes $8,000 for a two-car garage. The kit at the hardware store is $150. All three describe different work, which is why the numbers never line up.
We coat floors around Hood and Parker County most weeks, from Granbury out to Weatherford. Three things set your price, and once you know them the range starts to make sense.
What a real floor costs here
A professionally installed coating in North Texas runs $5 to $9 a square foot. A two-car garage of 400 to 500 square feet lands between $2,400 and $4,000, depending on the system you pick and the shape your slab is in. A DIY kit costs less up front and does a different job.
The three things that set your price
Square footage
Bigger floor, more material and labor. The cost doesn’t climb in a straight line, though. A lot of the price sits in setup, grinding, and prep, so a 720-square-foot three-car garage costs less than double a one-car.
The condition of your slab
Most quotes skip past this one. Cracks, spalling, oil stains, or a failing expansion joint all have to come out and get repaired before any coating goes down. A clean, newer slab is quick to prep. A beat-up one takes more work and more material. If an installer gives you a firm number without asking about your concrete, they’re guessing.
The system
“Epoxy” covers a lot of different products:
- A single coat of epoxy is the cheapest and the weakest. It yellows and lifts in the heat.
- Epoxy with a flake broadcast looks better, grips better, and costs more.
- A full system, meaning a ground slab, epoxy base, full flake, and a polyaspartic topcoat, holds up the longest and takes a Texas summer.
The system you choose is the single biggest lever on price. That’s why one “epoxy garage floor cost” number never fits every quote.
Cost by garage size
Here’s what our flat $6 a square foot works out to for the common garage sizes around here. Add $1 a square foot if you want us to move everything out and put it back.
| Garage size | Typical sq ft | Cost at $6/sq ft |
|---|---|---|
| 1-car | 250 to 400 | $1,500 to $2,400 |
| 2-car | 400 to 576 | $2,400 to $3,460 |
| 3-car | 620 to 816 | $3,720 to $4,900 |
| Shop or barn | 1,000+ | $6,000+ |
A workshop or barn floor scales off the same rate, so a 1,200-square-foot shop runs about $7,200 for the full system.
DIY kit vs. hiring it out
| DIY kit | Professional system | |
|---|---|---|
| Up-front cost | $150 to $600 | $2,400 to $4,000 (2-car) |
| Slab prep | Acid etch (weak) | Diamond grind |
| Topcoat | Usually none | UV-stable polyaspartic |
| Typical lifespan | 1 to 3 years | 15 to 20+ years |
| Hot-tire pickup | Common | Resisted |
A shelf kit is paint-grade epoxy rolled over a lightly etched floor. In our heat that combination peels and yellows, and it turns into the tired garage floor you’ve seen at a buddy’s house. For a floor you coat once and stop thinking about, a kit won’t get you there.
Why the Texas heat changes the math
A garage in Ohio and a garage in Granbury aren’t the same job. Our slabs bake all summer. Tires come home off a hot highway and pull weak coatings straight off the concrete. Installers call that hot-tire pickup, and it’s the top reason cheap epoxy fails down here.
We lay an epoxy base for the bond, then seal the floor under a UV-stable polyaspartic topcoat that stays clear and takes the sun. That costs a little more than a one-coat job. It also saves you from grinding the whole thing off and starting over in two summers.
What we charge
We keep it to one number: $6 a square foot, all-inclusive. That covers the grinding, crack and joint repair, the epoxy base, a full flake broadcast in your color, the polyaspartic topcoat, labor, and cleanup. The only add-on is $1 a square foot if you want us to haul everything out of the garage and put it back.
A two-car garage runs about $3,000 to $3,600, and you see that number before we ever drive out, whether you’re in town or on a county road out past Aledo. No salesman at your kitchen table, and no price that jumps once we walk the space.
The bottom line
Cheap floors skip the prep and skip the topcoat, and you pay for that twice when they peel. A full system costs more the one time, then it sits there and lasts. For most North Texas garages that’s $5 to $9 a square foot done right, which pays off if you’d rather lay a floor once and be done.
Common questions
How much does it cost to epoxy a 2-car garage?
At our flat $6 a square foot, a 500-square-foot two-car garage runs about $3,000, or $3,600 if you want us to move everything out and set it back. That covers grinding, crack repair, the epoxy base, full flake, and the polyaspartic topcoat.
Is an epoxy garage floor worth it?
For most North Texas homeowners, yes. A full system lasts 15 to 20+ years, cleans up with a hose, and hides wear. A hardware-store kit saves money up front and peels in a summer or two, so you end up paying again.
How much does a DIY epoxy kit cost compared to hiring a pro?
A shelf kit runs $150 to $600 and gives you one coat over a lightly etched floor. A professional system runs $2,400 to $4,000 for a two-car garage and holds up for years. Different price, different product.
How long does an epoxy garage floor last in the Texas heat?
A single-coat kit lasts 1 to 3 years here before it yellows or lifts. A ground-and-sealed polyaspartic system lasts 15 to 20+ years through the summers.